Filter
Top Products
80
OK
Count Down
Stop?
Yes
No
F45
30min.
Notes: 1. If the alarm is set to sound during a call, the clock
alarm will ring after the call.
2. The clock alarm does not ring during power off,
but this feature will be activated again when you
turn the power on.
3. The clock alarm may not ring in Auto mode if you
skip the alarm time traveling into an area with the
different local time.
4. See Ringer Volume Control (F31) on page 75 to
change the alarm sound volume.
5. In place of the alarm sound, you can use Vibrat-
ing Alert (F8) on page 89.
Countdown Timer (F45)
This feature alerts you when the countdown timer ex-
pires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press
F
4
GHI
5
JKL
.
2. Enter the duration, 1 to 99
minutes.
3. Press
F
to start. The
indicator will be displayed.
4. When the timer expires, the
alarm will ring for one
minute with animation.
5. Press any key to stop ring-
ing.
To Cancel the Countdown Timer
1. Press
F
4
GHI
5
JKL
again
after the timer has started.
2. “Count Down Stop?” is
displayed with the remain-
ing minutes to expire.
3. Scroll to “Yes” and press
F
to cancel. The
indicator will go out.
Notes: 1. If the timer expires during a call, the alarm will ring
after the call.
2. When you turn the power off, the countdown timer
will be canceled.
3. See Ringer Volume Control (F31) on page 75 to
change the alarm sound volume.
4. In place of the alarm sound, you can use Vibrat-
ing Alert (F8) on page 89.
OK
Count Down
Timer
F45
00min.
Time is UP!