Filter
Top Products
4610 and 5610 User Guide
4610 and 5610 User Guide Page 28
IP Office 3.2 [15-601080] Issue [3] (5 June 2006)
Phone Screen on Calling
This action controls the phone screen display when the phone is answered.
When the Phone Screen on Answer? option is set to Yes (the default setting), the phone screen
appears in the display area when you answer a call, regardless of the screen you were working with at
that time. You will lose any unsaved work in progress on that screen (for example, labeling a Speed Dial
button).
When the Phone Screen on Answer? option is set to No answering an incoming call has no impact on
the application screen displayed, although the top display line will provide an appropriate message.
To change Phone Screen on Calling:
1. Press Options and then press Application Options.
2. Press Phone Screen on Calling. It will toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel. After
saving or canceling, the first Options main screen is displayed.
Display Call Timers
This action controls whether the duration of the current call is displayed or not. If set to Yes, the duration
of the current call is displayed on the call appearance key. If set to No, the call duration will not be
displayed.
To change the Display Call Timers status:
1. Press Options and then press Application Options.
2. Press and then press Display Call Timers?. It will toggle between Yes and No.
3. Press Save. To restore the previous setting without changing it, press Cancel.
Message Display Rate
When the IP Office sends messages to your phone that are longer than the display area, the first part of
the message is presented for a specific time interval. The second part of the message is then displayed
for a specific time interval. The Message Display Rate can be either Fast (display interval is 2 seconds)
or Slow - default (display interval is 3 seconds).
To change Message Display Rate:
1. Press Options and then press Application Options.
2. Press and then press Message Display Rate. It will toggle between Fast and Slow.
3. Press Save. To restore the previous setting without changing it, press Cancel.