Filter
Top Products
485DSS3298 Manual 17
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 434-7094
Running Demonstration Program
Before you can run the demonstration program, you must run
the install program described in the “Hard Drive Installation” section
above. Make sure you have made the proper connections from the
485DSS to the RS-485 communication lines.
If you are running Windows, exit Windows to DOS.
To run the program follow these steps from the DOS prompt:
QuickBasic Program
1. Type CD \485DSS and press the <Enter> key.
2. Type DSS_DEMO and press the <Enter> key.
C Demo Program
1. Type CD\485DSS\C and press the <Enter> key.
2. Type DSS_DEMO and press the <Enter> key.
Pascal Demo Program
1. Type CD\485DSS\PASCAL and press the <Enter> key.
2. Type DSS_DEMO and press the <Enter> key.