Filter
Top Products
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Manual software upgrade
If new software is available and you selected to upgrade later,
you can manually upgrade the software at any time using the
handset menu.
1. Press Menu to access the menu.
2. Press or to scroll and display
HANDSET
and
press
OK .
3. Press or until
HANDSET SOFTWARE
is displayed and
press
OK .
4.
CHECK SOFTWARE
is displayed, press OK to confirm.
5. As requested, place the handset on the charger linked to the
Hub. During download, once it is on the charger, the display
shows
DOWNLOADING, LEAVE HANDSET IN CHARGER...
.
The backlight may turn off but do not remove the handset
from the charger. Leave handset in charger. When the
upgrade is complete,
DOWNLOAD COMPLETE
is displayed and
the handset resets and automatically re-connects to the base.
While the handset is being updated,
the update cannot be cancelled. If you
take out the handset from the cradle,
the update is interrupted. If you put it
back within 90 seconds, the update
will resume and will be completed
correctly. If you do not put it back
within 90 seconds, then the handset
is unusable and you need to use
the rescue mode from the Hub,
see page 69.
It may take 3 minutes to upgrade
successfully.
Software upgrades68
If you try to upgrade using the menu
and there is no upgr
ade available, you
will see the message
NO UPGRADE
AVAILABLE
.
7916 Hub Phone 1010 [6] 19/12/06 16:18 Page 68