Filter
Top Products
E-48
Do not subject the Handheld Terminal and USB Cradle to vibration or impact
during communication. This can cause communication to be interrupted.
When placing the DT-X7, make sure that it is seated properly and that the power
LED at the front of the USB Cradle is lit in green. Charging and communication
will not proceed properly if the Handheld Terminal is not seated properly.
Always cap ports that are not being used. Using the USB Cradle while the ports
are uncapped can cause damage.
Specifi cations
1. USB
Protocol: USB Ver1.1 Standard
Transfer Rate: 12Mbps (max.)
2. Charging
Charging Method: Constant current/voltage
Charge Period: Approximately 3 hours (battery pack)
Approximately 5.5 hours (large-capacity battery pack)
3. Power Supply
Power Source: AC adaptor (AD-S42120B)
Consumption Current: 12V DC approximately 1.3A
Output to Handheld Terminal
: 5V DC 1.6A (max.)
USB Host Output: 5V DC 0.5A (max.)
4. AC Adaptor
Model: AD-S42120B
Input: 100V to 240V AC 50/60Hz 1.2A
Output: 12V DC 3.5A
5. Dimensions and Weight
Dimensions: Approximately 93(W)
×
83(D)
×
101(H) mm
(3
11
⁄
16
"W
×
3
1
⁄
4
"D
×
4"H)
Weight: Approximately 270g (9.5oz)
6. Operating Environment
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 30% to 80% RH (non-condensation)
The AD-S42120 series comes available in the following models depending on area or region
where you are in.
Model no. of AC Adaptor Area/Region Compliance
AD-S42120B All except China Compliant with CE,
UL, FCC, and Energy
Effi ciency Standards.
AD-S42120B-CN China only Compliant with Energy
Effi ciency Standards and
CCC.
•
•
•