Filter
Top Products
E-53
When placing the DT-X7, make sure that it is seated properly and that the
power LED at the front of the Ethernet Cradle is lit in green. Charging and
communication will not proceed properly if the Handheld Terminal is not
mounted properly.
Always cap ports that are not being used. Using the Ethernet Cradle while the
ports are uncapped can cause damage.
Specifi cations
1. LAN Specifi cations
Communications protocol: IEEE 802.3
Media type: 10base-T/100base-TX auto-switched
2. USB
Protocol: USB Ver1.1 Standard
Transmission rate: 12Mbps (max.)
3. Charging
Charging Method: Constant current/voltage
Charge Period: Approximately 3 hours (battery pack)
Approximately 5.5 hours (large-capacity battery pack)
4. Power Supply
Power Source: AC adaptor (AD-S42120B*)
Consumption Current: 12V DC approximately 1.5A
Output to Handheld Terminal
: 5V DC 1.6A (max.)
USB Host Output: 5V DC 0.5A (max.)
5. AC Adaptor
Model: AD-S42120B
Input: 100V to 240V AC 50/60Hz 1.2A
Output: 12V DC 3.5A
6. Dimensions and Weight
Dimensions: Approximately 93(W)
×
83(D)
×
101(H) mm
(3
11
⁄
16
"W
×
3
1
⁄
4
"D
×
4"H)
Weight: Approximately 280g (9.9oz)
7. Operating Environment
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 30% to 80% RH (non-condensation)
*See page 47.
•
•