Filter
Top Products
iAUDIO
X
5
ENGLISH
10
■
TextViewer Operation
■
Section Repeat Setup
Section Repeat is a feature that allows the user to setup a section he/she wants to listen to and playback in the
selected range.
1. In Digital AV mode, press the REC (A
◀▶
B) button at the starting point of the section you wish to repeat during
audio file playback, the (A
◀▶
) icon will appear in the upper status bar.
2. Press the REC(A
◀▶
B) button at the end point of the section you wish to repeat, the icon changes to (A
◀▶
B),
and the selected section will playback repeatedly.
3. Press the “REC” button again to cancel section repeat.
1. Connect iAUDIO to a PC with the USB cable.
2. Save the text file you want to see in iAUDIO to the “TEXTFILE” folder in iAUDIO.
3. Disconnect iAUDIO and the PC.
4. Turn the power ON and select a text file saved in the “TEXTFILE” folder with the Navigator.
This will enable text file viewing.
5. Moving the lever +, - will move the text line by line, and moving the lever with
◀
◀ ,
◀◀ ,◀
▶
▶ will move
▶▶ will move ▶
the text page by page.
6. Press the lever to launch a separate window and move directly to a specified location.
7. Press the “REC” button to exit TextViewer mode.
- You may view the text file while listening to music.
- Save text files only in the “TEXTFILE” folder.
- Image files will be recognized up to 128KB, and the maximum number of folders that files can be saved in is 49, and the maximum
number of files is 99 (total file number under “PICTURE”).
- You must select a section that is longer than 1 second.
- Selecting or searching different songs during section repeat setup will also cancel the section repeat operation.
- This function only applies to audio files. Section Repeat does not apply to encoded video files.
■
Dynamic Play-List (Referred to hereafter as DPL) Setup
■
Adding songs to the DPL