Filter
Top Products
iAUDIO
X
5
ENGLISH
14
Line-In Record mode is a feature which allows the user to record sound from another audio device to
iAUDIO using the stereo cable shipped with the product.
1. Connect the headphone terminal of the CDP to Line-In terminal of iAUDIO with the stereo cable.
2. Turn the product ON and move to Line-In Record mode.
3. Pressing the “PLAY” button on the CDP will start the recording from iAUDIO.
4. Pressing the “REC” button again will stop recording.
5. To listen to the recorded files, press the “PLAY” button after the earphone is connected.
- To playback recorded files using features such as search, you may run the files in Navigator using Digital AV mode.
- If you were running Voice Record before turning off the product, it will resume in Voice Record mode when the power is turned
on again.
- Recording consumes more battery power than usual. Be sure to fully charge the battery before recording.
- The recorded file can be verified in “VOICE” of the upper most folder.
- The quality and capacity of the recording depends on the recording quality setup in addition to the reception.
- Maximum capacity for a single recording is 268MB. A new file will be created and start recording if the capacity is exceeded.
- If there is less than 128MB space available on the hard disk, the recording will not start. If the available space becomes less than
128MB during recording, the recording will end.
- Up to 999 files can be recorded.
CDP Playback
4. LineIn Record Mode(Recording Using a Stereo Cable)
1. Connect iAUDIO to a PC with the USB cable.
2. Save the image file you want to see in iAUDIO to the “PICTURE” folder in iAUDIO.
3. Disconnect iAUDIO and the PC.
4. Turn the product ON and move to Picture mode.
5. You can see the image files that are saved in the ‘PICTURE” folder.
6. Moving the lever +, - will enlarge and reduce the image size, and moving the lever
◀
◀ ,
◀◀ ,◀
▶
▶ will allow
▶▶ will allow ▶
you to see the Previous/Next image in sequence.
7. Pressing the “PLAY” button will show the Thumbnail image and Fast Search is available.
5. Picture mode(Image Viewing)