Filter
Top Products
QH32DVR4C User’s Manual
42
Date OSD Position
In “Camera” menu you can adjust the position where you want the Date to
display, move active frame to “Position” on the right side of “Date OSD” and press
the ENTER button. Then you will see the picture below. Use
to adjust the position of the date.
Fig 5.11 Set position of Date & Time
5.6 Video Parameters Setup
For different cameras and different backgrounds, in order to get the best video
image, you may need to adjust video parameters such as brightness, saturation,
contrast and hue, etc.
You can setup each camera individually, and you can also copy the video
parameters of one camera to any other cameras. Here are the setup steps:
Step 1: Enter into “Camera”, select a camera then enter “Color setup” menu as
shown in fig5.12