Ericsson GF768 Cell Phone User Manual


 
the message into the following types (if
supported):
E-Mail
The E-mail address cannot contain more than
20 characters.
Telex
Fax
Both group 3 and 4.
X400
Voice
Changing Message Type
1. Select Options in the Send menu.
2. Select Msg Type.
3. Select the message type you want.
Receiving a Message
When you receive a message the display looks
like this:
At the same time you will hear a beep as loud as
the ring signal and the green light on top of the
phone will flash.
Reading an
Incoming Message
1. Press YES when you have received a message.
The display will show you the date of the in-
coming SMS, you can see the time by press-
ing .
2. Press
YES.
The display will show you from which phone
number the message is sent, or the name if
stored in your phone book. The display could
now look like this:
The arrow shows you that you can start scroll-
ing through the message with the right arrow
key.
3. Press the right arrow key to read the message.
When you have read a message, you can do one
of the following:
Call a phone number in the message by press-
ing
YES.
Erase the message by pressing YES at the
erase prompt.
Store the message by pressing NO at the erase
prompt (you may get a reply prompt if the
sender has required a reply). Press
YES at the
Store prompt and the message is stored on the
SIM Card.
Erasing a Message
Press CLR any time during the message and
answer
YES on the question prompt.
Reading an
Old Message
1. Select the Read menu.
2. Scroll to the message you want to read and
press
YES.
3. Read through the message by pressing the
right arrow key.
22 LZT 126 1343/2 R1A