Filter
Top Products
Assembly Instructions
This chapter describes how you assemble the phone, what the SIM Card is, and how you
handle the battery.
Assemble and
Charge – Four Steps
● Insert the SIM Card.
● Attach the battery.
● Connect the charger to the phone.
● Connect the charger to the mains.
1. Inserting SIM Card
Place the SIM Card with the golden connectors
facing down and the cut corner turned to the left
(see Figure 1).
Slide the SIM Card into the SIM Card slot.
The SIM release button will slide towards the
antenna as the SIM Card is pushed in.
Removing SIM Card
1. Make sure the battery is removed.
2. Slide the SIM release button towards you
(see Figure 2).
3. Pull out the SIM Card.
1.
2.
1.
2.
Figure 1. Inserting SIM Card
Figure 2. Removing SIM Card.
EN
LZT 126 1343/2 R1A 1