Ericsson T18di Cell Phone User Manual


 
Getting Started 13
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
-
E
ri
c
s
s
o
n
I
n
c
.
Note! If the phone is powered On, the battery icon is replaced by the
icon once the battery is fully charged.
Note! If the phone is in charge-only mode, Charging Complete
appears in the display when the battery is fully charged.
Selecting Your Charger
Your phone is packaged with one of the following battery chargers:
Rapid charger
Travel charger
Desktop charger
Rapid Charger
The rapid charger supplies power to charge
your battery while the battery is attached to
your phone. If your phone is On, it can receive
calls while using the rapid charger.
To charge your battery using the rapid charger:
1 Plug the charger into a standard wall electrical
outlet.
2 Hold the phone with the display and keypad
facing up.
3 Hold the small plug on the charger cord so
the lightning bolt symbol is up.
4 Align the small plug on the charger cord with
the connector on the bottom of your phone.
The connector on the phone is above the
lightning bolt symbol.
Note! Do not twist while inserting or removing the small plug on the
charger cord!
5 Press the plug into the connector until the plug snaps into place.
Note! To disconnect the charger, lift the plug connected to the phone
upwards and pull it out.
6 Continue charging the phone until the battery is fully charged.
Note! If the phone is powered On, the battery icon is replaced by the
icon once the battery is fully charged.
Note! If the phone is in charge-only mode, Charging Complete
appears in the display once the battery is fully charged.