Ericsson T18di Cell Phone User Manual


 
Getting Started 15
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
-
E
ri
c
s
s
o
n
I
n
c
.
2 Remove your phone from the
desktop charger when the
light turns green, which indi-
cates that the battery attached
to your phone is fully charged.
Charging a Separate Battery
1 Insert the battery into the rear com-
partment of the desktop charger.
2 The desktop chargers rear indicator
light comes on red when the battery is
properly seated in the rear compart-
ment.
3 Remove the battery from the desktop
charger when the rear indicator light
turns green, which indicates that the battery is fully charged.
Note! You can charge two batteries at the same time (one battery
attached to your phone and placed in the front compartment and
another battery in the rear compartment).
Conditioning Your Battery
The rear slot of the desktop charger can be used to condition a
battery by fully discharging the battery and then charging the battery
to full capacity. Conditioning helps prevent the memory effect that
can result from repeatedly charging a battery before the battery is
fully discharged.
Note! Only the rear slot on the desktop charger can be used to condition
a battery.
1 Insert the battery into the rear compartment of the desktop
charger.
2 Press the light on the right rear side of the desktop charger. The
light remains a steady orange while the desktop charger discharges
the battery. It can take anywhere from two to six hours to dis-
charge the battery, depending on the battery type.
Note! The light turns a steady red when the desktop charger begins
charging the battery.
3 Remove the battery from the desktop charger when the light turns
green, which indicates that the battery is fully charged.