Filter
Top Products
7-3
7.3 Confirming VHF Section Settings
You can confirm VHF section settings as follows:
If you want to change VHF section settings, contact FURUNO
agent or dealer for service.
Procedure
At screen 1 on page 7-1, select “RT” and press the [ENT] key.
Press the [ENT] key.
Press the [CANCEL] key
to go to previous display.
Press the [ENT] key.
Press the [ENT] key.
Time-out timer status (ON/
OFF) appears.
Select USA/PRIV mode in the
VHF channel mode.
In on-hook status, CH16 and
speaker status appear.
RT 2-Hookworking: CH16 SP
protected ON ON
RT 3-Time out timer: off
protected
RT 1-Mode: USA/WX PRIV
protected ON OFF
Press the [ENT] key.
Press the [ENT] key.
Press the [ENT] key.
To escape, press the [ENT] key and then press the [CANCEL]
key twice or to see VHF channels, press the [ENT] key twice.
Dual watch and scanning
status is displayed.
Auto squelch status is
shown.
ON: Monitor Tx AF signal
from RB-700, Wing HS, HS
and DSC.
Automatic TX power
reduction status (ON/
OFF) appears.
RT 5-Auto 1W: ON
protected
RT 6-Scanning: DW SCAN
protected OFF OFF
RT 7-AutoSQ: LOW HIGH HOLD
protected
RT 4-Tx AF monitor: OFF
protected
00
03 30
CH16: ON>Automatically switches to CH16
when handset is on hook.
SP: ON>Handset is off hook: SP is OFF.
Handset is on hook: SP is ON.