Filter
Top Products
nüvifone M20 Quick Start Manual 25
radiocommunication devices comply
with Industry Canada Standard RSS-310.
Radio Frequency Exposure /
Specic Absorption Rate
This device is a transmitter and receiver
that uses its antenna to send and
receive low levels of radio frequency
(RF) energy for voice and data
communications. The cellular antenna is
located above the camera lens, along the
top edge of the back of the device. The
Wi-Fi and Bluetooth
®
antenna is located
to the right of the camera lens on the
back of the device.
Regular review of scientic research
and studies has led to the formation
of international safety guidelines and
regulations regarding limiting exposure
to this RF energy. This product emits RF
energy below the published limits when
operating in its maximum output power
mode and when used with Garmin-
Asus authorized accessories. In normal
operation, the device will operate at even
lower output power modes, depending
on many factors including proximity to
network cellular towers and the absence
of external interference.
The RF exposure guidelines use a unit
of measurement known as the specic
absorption rate, SAR. The SAR limit
applicable to this device set by the FCC
is 1.6 watts per kilogram (W/kg), 1.6
W/kg by Industry Canada, and 2.0 W/kg
by the Council of the European Union.
This device has been tested and is
compliant with the FCC, IC, and
European Union RF exposure guidelines
for cellular, Wi-Fi, and Bluetooth
operation. For countries where this
product is sold outside of the United
States, Canada, and the European
R&TTE member countries, this product
has been tested and is compliant to the
applicable RF exposure requirements of
the local regulatory authority.
To be sure that your exposure to RF
energy does not exceed the FCC and
European Union guidelines, follow these
precautions:
Position the device antenna at least 15
mm (5/8 inch) from your body.
•