Filter
Top Products
10
English
2.2 Remove Memory Card, SIM Card, and Battery
Turn the device off. Then, remove the battery, SIM card, and memory card. Do not insert or remove
memory card in whilst device is turned on, otherwise it can cause damage to the file system.
Do not plug or remove memory card in boot state, otherwise it will cause damage to the file system.
2.3 Charge the Battery
1. Before charging, check the battery slot to ensure the battery has been
installed correctly.
2. Plug the provided micro USB part of the charger into phone.
3. Connect the opposite end to the charger and plug into the socket.
4. Start charging. The device can be charged whether powered on or off.
• In power on state, when the battery icon on top right of the screen starts
rolling means it is being charged. When the icon is full and stops rolling
the battery is fully charged.
• In power off state, when the battery icon on the screen starts rolling
means it is being charged. When the icon is full and stops rolling the
battery is fully charged.
5. Unplug the charger from the socket.
6. Disconnect the charger and phone.
2.4 Use Touch Screen
• Press: Use finger to press the desired option to confirm selection or start an application.
• Long press: Long press the screen in current operation interface, icon, or input area; you can
open the option menu in current interface.
• Slide: Slide the finger on screen horizontally or vertically. For example, slide the screen in
standby mode or main menu horizontally to change menu page.
• Drag: Use finger to long press desired item, drag it to anywhere on screen. For example, you can
drag the icon in main menu to standby screen.
NOTE:
• If the phone is turned on, long press the Power key about 3 seconds until the Phone Options menu
appears and select Power Off > OK to turn off the phone.