Filter
Top Products
3
No. Item Description
8
Number and
symbol keys
Enter numbers, letters, and symbols.
Number keys (2–9): Speed-dial a user-assigned phone
number by pressing and holding a key in standby mode.
# key: Switch between text input methods in editing mode.
* key: Display the symbol list in editing mode.
9
End key
End or reject a call.
Press and hold this key to power a handset on or off.
Return to the standby mode.
10
Clear key
Press this key to delete the character to the left of the cursor in
editing mode.
11
Right function
key
Select the option displayed in the lower right corner of the
screen.
12 Power key Press and hold this key to power the base on or off.
13
Page/Register
key
Press this key to page a handset. This helps you to locate a
handset that has been misplaced.
Press and hold this key to register a handset with the base.
14 Reset key
Press and hold this key in standby mode to deregister all
handsets from the base and restore the registration password
to the default value. In this case, the base restarts
automatically.
15 Signal indicator
Off: indicates that there is no signal or that the base is
searching for a network or being initialized.
Steady on white: indicates that the signal is strong.
Blinking slowly in white: indicates a Subscriber Identity
Module (SIM) card–related fault, such as no SIM card
inserted, personal identification number (PIN) or PIN
unblocking key (PUK) unverified, and SIM card unable to
work properly.
16 Battery indicator
Off: indicates that the battery has sufficient power or that the
battery is not installed in the base.
Steady on red: indicates that the battery is being charged.
Blinking slowly in red: indicates that the battery power is
insufficient and that you need to charge the battery.
Steady on green: indicates that the battery has been fully
charged.
17 Power indicator
Off: indicates that the base is powered off.
Steady on white: indicates that the base is powered on.
Blinking slowly in white: indicates that the base is in paging
state.
Blinking fast in white: indicates that the base is registering a
handset.