Filter
Top Products
6
Connecting a Handset to the Base
Registering a Handset
Register a handset with the base before using it. Otherwise, you cannot use the handset.
To register a handset, do the following:
1. Press and hold the page/register key on the base until the power indicator blinks fast.
2. On the handset, select Settings > Handset > Register handset.
3. Select the base to be connected, and then enter the registration password.
4. Press the OK key to register the handset with the base.
Note:
The default registration password is 0000. To change the password, select Settings
> Base > Security > System PIN.
When registering a handset with the base, ensure that the handset is near the base.
After the handset is registered, use the handset within a certain distance of the base.
Otherwise, the handset will display a message and disconnect from the base.
You can register a maximum of six handsets with the base.
Deregistering a Handset
To deregister a handset from the base, do the following:
1. Select Settings > Handset > Deregister handset.
2. Press the up and down navigation keys to scroll to the handset to be deregistered.
3. Press the OK key to deregister the handset from the base. You cannot use the handset
after the handset is deregistered.
Call Functions
Making a Call
1. In standby mode, press the number keys to enter a phone number.
2. Press the call key to dial the number.
3. Press the end key to end the call or cancel the dialing.
Note:
In standby mode, press the call key to view the call log. Find the desired number in
the call log, and then press the call key dial the number.
Find the desired number in the contacts, and then press the call key to dial the
number.
Answering or Rejecting a Call
When there is an incoming call, press the call key to answer the call; press the end key to reject
the call.
Initiating an Internal Call
To initiate an internal call, do the following:
1. In standby mode, press the intercommunication key.
2. Press the up and down navigation keys to scroll to the handset to be connected.
3. Press the call key to initiate an internal call.