Filter
Top Products
8 Making and Answering Calls
2MAKING AND ANSWERING CALLS
Making a call
1. Make sure you are in an area where the signal
can be received. Open the flip and look for the
§ symbol on the home screen.
Note: The more bars you see in this symbol, the
clearer the reception will be. If there are no
bars, try to move to where the reception is
better. In some cases, this can be as simple as
turning to face a different direction.
2. Enter the phone number.
3. Press .
Note: If your phone cannot locate a signal for
15 minutes, it changes to power-save mode. If
you see the message “Power Save Mode” and a
on the screen, press any key to return to
normal operating mode and try your call again.
4. When you are done, close the flip or press
to end the call.
Exception: You must press to end the call
if you are using the phone for a data or modem
call or if an accessory such as a headset or
portable hands-free car kit is attached.
Redialing a number
To redial the last number called, press twice.
Answering a call
When a call comes in, the phone will ring or
vibrate.
• To answer the call, open the flip. If the phone
continues to ring, press .
You can set the phone to answer in two ways:
Answer automatically when you open the flip or
don’t answer until you press . To change the
setting, see “Changing the way you answer calls” on
page 9.
To change the ringer, see “Choosing a different
ringer” on page 29.
Answering calls hands-free
If your phone is attached to a portable hands-free
car kit (sold separately), you can set it to answer an
incoming call after five seconds.
• Select
Menu → Settings → Accessories →
Auto-Answer → After 5 seconds.