Filter
Top Products
User Guide for the Kyocera 5135 Phone 15
2. Select an option and press .
–
Automatic automatically switches the phone
between digital and analog.
–
Analog only sets the phone to work in
analog mode only.
–
Analog call forces a call into analog mode
for the duration of the next call.
–
Digital only sets the phone to work in
digital mode only.
Setting an alert for roaming
charges
Use this setting if you want the phone to alert you if
you roam outside of your home service area.
1. Select Menu → Settings → Network →
Roam/Srvc Alert.
2. Select an option and press .
–
Disabled will not alert you if you roam
outside your home service area.
–
When no service alerts you with three
tones, decreasing in intensity, when service
is lost. When service is acquired again, you
will hear three tones increase in intensity.
–
On roam change alerts you with two tones,
decreasing in intensity, when roaming
service is acquired. When home area
service is acquired again, you hear three
tones, increasing in intensity.
–
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Controlling network roaming
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
1. Select Menu → Settings → Network →
Roam Option.
2. Select an option and press .
–
Automatic (recommended setting) accepts
any system the phone service provides.
–
No roaming prevents you from making or
receiving calls outside of your home service
area.