Filter
Top Products
User Guide for the Kyocera Prisma Phone 1
1GETTING ST ARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
1. Hold the phone with the back facing you.
2. Unsnap the battery
door by using the latch
located at the bottom
of the battery door.
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the
phone.
4. Place the battery door tabs in the openings on
the side of the phone.
5. Press the battery door
until it snaps into place.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
Fully charge the
battery before using the phone.
To charge the battery, connect
the AC adapter to the jack on the
bottom of the phone, then plug
the adapter into a wall outlet.
The battery icon in the upper-
right corner of the screen tells
you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Caring for the battery
General safety guidelines
• Do not take apart, puncture, or short-circuit
the battery.
• If you have not used the battery for more than
a month, recharge it before using your phone.