Filter
Top Products
User Guide for the Kyocera KX9e Phone 13
– To accept or place a call while roaming,
you must press .
Note: Call Prompt is disabled when the phone is
in emergency mode.
Setting digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu → Settings → Network →
Digital/Analog.
2. Select an option and press .
– Automatic automatically switches the
phone between digital and analog.
–
Digital only sets the phone to work in
digital mode only.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone will accept.
1. Select Menu → Settings → Network →
Roam Option.
2. Select an option and press .
– Automatic (recommended setting)
accepts any system the phone service
provides.
–
No roaming prevents you from making
or receiving calls outside of your home
service area.
82-G1677-1EN.book Page 13 Wednesday, June 7, 2006 2:06 PM