Filter
Top Products
80
Audio & Ringtones
Menu 9.1
There can be 4 sound modes: General,
Vibrate All, Alarm Only and Silent All.
General, Vibrate All, Alarm Only and All Silent
modes can be changed from the Volume menu
(Menu 9.1.2) under Ringtone and Alerts (Menu
9.1.2.1) In addition, pressing and holding the
[Star] key on idle screen mode can
switch between "Vibrating Mode On" and
"Vibrating Mode Off". Ear Mic is available
when respective instruments are attached.
Shop Tones
(Menu 9.1.1)
Connects to AT&T Ringtone Shops.
Volume
(Menu 9.1.2)
This menu controls Ringtone, Multimedia, Call
and Keypad volume.
Ringtone
(Menu 9.1.3)
] Sounds: Shows and plays ring tones.
These can be downloaded ring tones from
Ring tone shops.
] Alert Type: Supports 3 ring alert types.
Ring, Ring and Vibration, and Ring after
Vibration.
] Increasing Ringtone: Allows you to select
an Increasing Ringtone type which is played
when you receive an incoming call. You can
elect to turn this On of Off.
Message Tone
(Menu 9.1.4)
] Sounds: Shows and plays message tones.
These can be downloaded ring tones from
Ring tone shops.
] Alert Type: Supports 6 message alert
types. Ring Once, Ring Every 2 Min.,
Ring Every 15 Min., Ring & Vibrate, Vibrate,
Silent.
n
Note
Full length music tracks cannot be set as
ringtones.
Alert Tone
(Menu 9.1.5)
] Sounds: Allows you to select a set of alert
tones. Supports 2 alert tone types, Alert
Tone 1 and Alert Tone 2.
] Alert Type: You can select to turn Alert
Tones to Ring or Silent.
Settings