Filter
Top Products
65
4 The Status Bar at the top of your screen
will display an icon that indicates your
Wi-Fi status.
n
TIP
If you are not in range of a Wi-Fi network
and use a network connection. Additional
data charges may apply.
n
NOTE
Access to the Internet and a wireless
router required. As an added
convenience,has shipped certain
smartphones with Wi-Fi enabled as a
default setting. Leaving Wi-Fi enabled
when not connected to a Wi-Fi network
may affect battery charge. Qualifying
data plan required.
n
NOTE
This device supports WEP, WPA/WPA2-
PSK and 802.1x EAP. (Some EAP methods
are not supported.) If
your Wi-Fi service
provider or network administrator sets
encryption for network security, enter the
key in the pop-up window. If encryption
is not set, this pop-up window will not
be shown. You can obtain the key from
your Wi-Fi service provider or network
administrator.
Bluetooth
Using Bluetooth
1 From the
WIRELESS & NETWORKS
section, tap Bluetooth, then drag
to the right to turn on the Bluetooth
functionality.
2 Tap
Search for devices
at the bottom of
the screen.
3 Tap the name of the device you wish to pair
with, and then tap
OK
to pair and connect.
n
TIP
Please consult documentation included with
Bluetooth device for information on pairing
mode and passcode (typically 0 0 0 0 – four
zeroes).
How to send data from your phone via
Bluetooth
You can send data via Bluetooth by running a
corresponding application, not from Bluetooth
menu.
*
Sending pictures:
Open the Gallery
application and tap a picture. Then tap
>
Bluetooth.
Check if Bluetooth is turned on
and tap
Search for devices
. Then tap the
device you want to send data to from the list.
Settings