Filter
Top Products
Camera
Menu 4
52
The F2400 has a built-in camera. It supports Zoom,
Colour/Grey settings, and Multi burst functions.
Take photo Menu 4-1
Press the Menu key ( ) and select Camera >
Take photo. Or, press the camera key ( ) in
standby mode. The camera module opens and you'll
see the view to be captured.
Before shooting, you can set the following values.
1. Digital zoom (): x1, x2, x4, x8
2. Tone (): Colour, Sepia, Black and white
3. Brightness (): +2, +1, 0, -1, -2
4. Timer (): Off, 3 sec., 5 sec.
5. Memory (): Shows the current memory status.
n Note If the memory is full, “Memory full” message is
popped up and you cannot save a photo. Create
space by deleting old photos in Photo album.
6. Flash (): Select the flash on ( )/off ( )
by the up/down navigation keys.
7. Resolution (): 640x480(VGA), 320x240(QVGA),
128x160(Screen). 48x48(Address book)
8. Image quality (): Fine/Normal/Basic
1. Center the desired option menu using the left/right
navigation keys.
2. Select the desired value with the up/down
navigation keys.
3. After finishing all the settings, focus on the subject
to capture and press the Camera key or OK key.
With a click, the image is captured and the
following menu bar appears.
preview option
menu bar