Filter
Top Products
70
Settings
] Any Key: You can answer an incoming call by
pressing any key, except the [END] key.
] Send Key Only: You can answer an incoming call by
only pressing the [SEND] key.
Minute Minder (Menu 9.6.5)
This option allows you to specify whether the phone
will beep every minute during an outgoing call to keep
you informed of the length of the call.
Fixed Dial Number (Menu 9.6.6)
This allows you to restrict your outgoing calls to select
phone numbers, if this function is supported by your
SmartChip. The PIN2 code is required.
The following [Options] are available:
] On: You can only call phone numbers stored in the
Address Book. You must enter your PIN2.
] Off: You can call any number.
n Note
Not all SmartChips have a PIN2. If your SmartChip does not,
this menu option is not displayed.
Call Waiting (Menu 9.6.7)
The network will notify you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Deactivate
to request the network to deactivate call waiting, or
View Status, to check if the function is active or not.
Call Reject (Menu 9.6.8)
This menu allows you to enable or disable call reject
for all numbers or a specific number.
] Off
] Reject on List: Configures conditional call reject
mode. Press the left soft key [List] to add the phone
number to the list to be rejected. When you add a
number to the list, you can add the number by
entering it directly or by searching for the number in
the Contact List.
] Reject All Calls: This feature allows you to reject all
arriving calls unconditionally by disconnecting.
When the Reject All Calls option is set, all received
calls are directly routed to Voice Mail.