Filter
Top Products
LX5450
LX5450
107
Mode(1X/QNIC) (Menu )
This is setting enables you to set the speed for WAP,
BREW and Tethered Mode.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press
Mode(1X/QNIC).
4. Select an option and press .
Auto/1X/QNIC
PAP ID (Menu )
It is the user’s ID for PPP Authentication Protocol.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press PAP ID.
4. Enter a PAP ID and press .
PAP Password (Menu )
It is the user’s password for PPP Authentication Protocol.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press PAP
Password.
4. Enter a PAP Password and press .
M
ENU FEATURES
106
Select Port (Menu )
This setting enables you to select the port.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press Select Port.
4. Select an option and press .
USB/RS-232C(COM Port)/Closed
Port Speed (Menu )
This setting enables you to set the port speed.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press Port
Speed.
4. Select an option and press .
19200/115200/230400
Set the port speed based on your carrier’s
network. Contact your carrier to determine the
maximum available speed.
NOTE: When using the 1X HSPD data service
via an RS-232C data cable, the port speed is set
to 115,200. (230,400 is not supported). When
using the 1X HSPD data service via a USB data
cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.