Filter
Top Products
Mitel 5312/5324 IP Phones User Guide
MAKING AND ANSWERING CALLS
Make a Call
1. Lift the handset (optional).
2. If you want to use a Non–Prime Line, press a Line Appearance key.
3. Do one of the following:
Dial the number
Press a Speed Call key
Press
(REDIAL).
Answer a Call
Do one of the following:
Lift the handset.
Press
(SPEAKER).
Press the flashing Line appearance key and lift the handset.
Press the flashing Line appearance.
Emergency Calls
Warning for emergency number dialing: Consult your local authorities for Emergency
Numbers and 911 or equivalent service availability in your area. There are two methods of
dialing emergency numbers, based on the programming of your MCD:
Emergency Call Routing NOT programmed
Emergency Call Routing programmed
Caution: Verify with your System Administrator which type of emergency
number dialing you can use.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING NOT
PROGRAMMED
If Emergency Call Routing is NOT programmed, Emergency Number dialing should only be
performed by picking up the handset and selecting the Line Interface Module key you have
programmed. If Privacy Mode is enabled and the Line Interface Module key local line is busy,
dialing will not occur on the Line Interface Module line. Emergency dialing using an IP
connection may not be supported due to ICP system configuration and country location. For
more information, contact your System Administrator.
- 10 -