Set up your phone
16
Copyright © 2006 Nokia. All rights reserved.
damaged by scratches or bending;
please be careful when handling,
inserting, or removing the card.
Before installing the UIM card,
always make sure that the phone
is switched off and that you have
removed the cover and battery.
Keep all UIM cards out of the
reach of small children.
For availability and information
on using UIM card services,
contact your UIM card vendor. This
may be the service provider,
network operator, or other vendor.
To release the UIM card holder,
gently pull the locking clip, and
open the holder.
Insert the UIM card into the UIM
card holder so that the golden
contact area on the card is facing
downwards. Ensure that the UIM
card is properly inserted. Close the
cover of the UIM card holder, and
press it gently to snap it into place.
Replace the battery
1. Position the battery so the
gold-coloured contacts match
up with those on the phone.
The battery label should face
away from the phone.
2. Insert the battery, gold-
coloured contact end first, into
the battery slot.
3. Push down on the other end of
the battery to snap the battery
into place.
Replace the back cover
Slide the back cover toward the
top of the phone until you hear a
click and see the back cover
release button lock into place.