Filter
Top Products
Messages
36
Copyright © 2006 Nokia. All rights reserved.
messages > Listen to voice
messages.
When you connect and the
prerecorded greeting begins,
follow the automated instructions
to listen to your voice messages.
Save voice mail dialing
code
You can insert special characters,
known as dialing codes, into phone
numbers such as voice mail, and
save the number to a speed dial
location. Dialing codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialing string.
Voice mail is a network service. The
following instructions are
examples of common operations.
Please check with your service
provider for specific instructions
for using your voice mail service.
Write down number and
process
1. Write down your voice mailbox
number.
2. Call and check your voice mail
as you normally would.
3. Write down your interaction
with the recorded prompts
step-by-step. Note that each
voice mail service may vary.
Your steps may resemble the
following:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, and press
*.
Be precise; you will need this
information in “Set up voice
mail with dialing codes”, page
37.
Insert dialing codes
Press * repeatedly to cycle through
dialing codes. When the desired
code appears in the display, pause
briefly and the code is inserted
into the dialing string.
The following dialing codes are
available:
Dialing
code
Indicates...
* Bypasses a set of
instructions.
+ Causes the international
access code to be replaced
by +.
p Pauses for 2.5 seconds
before sending any numbers
that follow.
w Waits for you to press the
call key before sending the
numbers or codes that
follow.