Filter
Top Products
Settings
54
Copyright © 2006 Nokia. All rights reserved.
1. Select Menu > Settings >
Security settings > Security
level.
2. Enter the security code, and
select OK.
3. Select one of the following
options:
None — Deactivate the security
level settings.
Memory — Set the phone to ask
for the security code when the
UIM card memory is selected,
when you change the memory
in use, or copy from one
memory to another.
Phone — Set the phone to ask
for the security code whenever
a new UIM card is inserted into
the phone.
4. Select Select to confirm the
activation.
Access codes
Change the security code
The security code controls access
to features and is supplied with
the phone. The preset security
code is 12345. After you change
the security code, keep the new
code secret and in a safe place
separate from your phone.
Avoid using codes similar to
emergency numbers such as 911 to
prevent accidental dialing of the
emergency number.
If you enter the wrong security
code five times in succession, you
will not be able to enter a code for
5 minutes, even if you power off
the phone between incorrect
entries.
1. Select Menu > Settings >
Security settings > Access
codes > Change security code.
2. Enter the current security code
(default is 12345), and select
OK.
3. Enter the new security code (up
to 10 characters), and select
OK.
4. Enter the new security code
again, and select OK.
PIN code
The PIN code protects the UIM
card from unauthorised access.
The PIN code must be obtained
from your wireless service
provider. The PIN code is typically
provided with your UIM card. The
PIN code can be 4-8 digits in
length. After three successive
incorrect entries the PIN code is
blocked. You are asked to enter the
personal unblocking key (PUK)
code. See “PUK code”, page 55 for
more information.