Filter
Top Products
28
∗∗ creates a “+” (link to another memory location). When
you recall this number sequence from memory and press
í, the phone dials the phone number, then displays
digits stored in the memory location you have entered.
Press left
ñ
(DTMF)
to send them.
Entering only a “+” at the end of a stored number causes
the phone to prompt you for a memory location after the
call is connected. The phone expects a memory location
after the “+” character. Enter a location number and press
left
ñ
(OK)
. Then press left ñ
(DTMF)
when the
phone displays the digits stored in that memory location.
Touch Tone Settings in the Phone
Your phone’s Touch Tone settings are Menu 4 3, Manual
DTMF Tones, and Menu 4 4, Auto DTMF Length.
Menu 4 3, Manual DTMF Tones
1) Press left
ñ
(Menu)
4 3.
2) Press W to your choice.
3) Press left
ñ
(OK)
.
This determines the length of the individual Touch Tones
when you press keys during calls. Note that regardless of
this setting, strings of Touch Tones can be sent.
Continuous
means the tone sounds for as long as you
hold the key.
Fixed
sets the tone length to 100 ms,
regardless of how long you press the key.
Off
turns the
tones off, meaning that no tones are sent when you press
individual keys.
Menu 4 4, Auto DTMF Length
1) Left
ñ
(Menu)
4 4.
2) Press W to your choice.
3) Press left
ñ
(OK)
.
This determines the length of Touch Tones in strings.
Short
sets the DTMF tone length to 100 ms.
Long
sets
the DTMF tone length to 500 ms.