Filter
Top Products
34
5) The phone then prompts you for other information,
such as
Access number
and
Card number
.
Enter this information at each prompt and press left
ñ
(OK)
.
6) You can enter the calling card name by pressing
÷
when the phone prompts you for the access number
or card number. The phone will then prompt you for
the card name. Enter it and press left
ñ
(OK)
.
To change stored calling card information (such as
your card number), go through these steps, but use
the
ù key to erase already stored information. Key in
the new information then press left
ñ
(OK)
.
Menu 3 8, Message Mode
See “Message Mode” on page 16 for a description of this
function.
Menu 4, Phone Settings
Menu 4 1, Lights
With lights on, the keypad lights come on when you press
a key or have an incoming call, and go off 15 seconds
later.
When the phone is connected to a car kit, desktop charger,
or cigarette lighter charger, the keypad lights are on
permanently when this setting is ON; when this setting is
OFF, the lights come on when you press a key or have an
incoming call, and go off 15 seconds later.
Note: You can turn on the lights for 15 seconds by pressing
the power key quickly, regardless of this setting.
Menu 4 2, Keypad Tones
You can select the volume level or turn off the sound the
phone makes when you press a key.
Note: The keypad tone volume is set separately for each
accessory you use.