Filter
Top Products
PBX installation
©2001 Nokia Mobile Phones. All rights reserved. 26
4 The call is established.
For further information on how to change the mode, see “ Changing application
module extension modes” on page 32.
Connecting the Nokia 22 to a trunk line
of a PBX
1 Disconnect the Nokia 22 PBX connectivity terminal power supply from the AC
wall outlet.
2 Connect the Nokia 22 to a free PBX trunk line with an RJ-11 cable.
3 Connect the power supply to the terminal.
If the AutoPIN feature is active, the Nokia 22 automatically connects to the net-
work. In 20-30 seconds, light indicator 3 lights up to indicate the network con-
nection and light indicator 1 to indicate the PBX trunk connection.
If the AutoPIN feature is not active, you have to enter your PIN code. For infor-
mation about entering the PIN code, see “ Entering the PIN code” on page 19.
For details, contact your PBX supplier.