Filter
Top Products
Copyright © 2006 Nokia. All rights reserved.
Set up your phone
6
Insert the battery so that the gold-
coloured connectors on the battery
align with the connectors on the
device (2).
Replace the back cover, align the
catches (3) together, and slide the
cover (4) forward.
Charge the battery
1. Plug the charger transformer into a
standard ac outlet.
2. Open the rubber cover located at
the top of the phone. Connect the
charger plug into the connector in
the device.
The battery indicator bar starts
scrolling. When the battery is fully
charged, the bar stops scrolling.
3. Disconnect the charger from the
device and the ac outlet.
■ Turn your phone on
and off
Warning: Do not switch the
device on when wireless
phone use is prohibited, or
when it may cause
interference or danger.
The on-off function for this device is
combined with the end key. To switch
the device on or off, press and hold the
end key.
When you switch the device on, it may
request a PIN code or security code.
Enter the code and select OK.
The preset security code is 12345.
For information about device codes,
see “Security settings”, p. 49.