Filter
Top Products
12
Important: Do not remove a microSD card in the middle of an operation when the
card is being accessed. Removing the card in the middle of an operation may damage
the memory card as well as the phone, and data stored on the card may be corrupted.
1. Remove the back cover and
the battery of the phone.
Slide the microSD memory
card holder down (1) and
flip the card holder up (2).
2. Insert the card into the
memory card holder with
the gold-colored contact
area facing up (3) so they
align with the contacts in
the phone when the card
holder is closed.
3. Close the card holder
(4 and 5), reinsert the
battery and slide the
back cover back in place.
■
Charge the battery
Check the model number of any charger before use with this phone. This phone is intended
for use when supplied with power from an AC-3, AC-4, or AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the charger to your phone.
A CA-44 charging adapter can be used
with older Nokia approved chargers.
If the battery is completely discharged, it
may take a few minutes before the charging
indicator appears on the display or before
any calls can be made.