Filter
Top Products
44
USB data cable
You can use a USB data cable to transfer data between the phone and a compatible
PC or a printer supporting PictBridge. You can also use the USB data cable with
Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select mode. and select from the following options:
Nokia mode — to use the phone to interact with applications on a PC that has
Nokia PC Suite
Printing & Media — to use the phone with a PictBridge compatible printer, or to
connect the phone to a PC to synchronize it with Windows Media Player (music, video)
Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Nokia mode, Printing & Media, or Data storage.
■
Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active. See Call
restrictions in "Security," p. 46.
Anykey answer > On — to answer an incoming call by briefly pressing any key, except
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Voice clarity > Active — to enhance speech intelligibility especially in
noisy environments
1-touch dialing > On — to dial the names and phone numbers assigned to the
speed-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider, select
Set by network.
Answer when fold is opened > On — to answer an incoming call by opening the fold