Filter
Top Products
2. Insert the card
into the microSD
card slot with
the contact
surface facing
down, and press
it until it locks
into place.
Remove the microSD card
Important: Do not remove the memory card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
You can remove or replace the microSD card during
phone operation without switching the device off.
1. Make sure that no application is currently accessing
the microSD memory card.
2. Remove the back cover of the device.
3. Press the microSD card slightly in to release the lock
and remove it.
Charge the battery
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the AC-3 and AC-4 charger.
The exact charger model number may vary depending
on the type of plug. For example, the model numbers
for the AC-3 charger can be AC-3C, AC-3U, AC-3X, etc.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the
power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the
charger to the charger
connector of your phone.
If the battery is completely
discharged, it may take a few
minutes before the charging
indicator appears on the
display or before any calls can
be made.
The charging time depends on the charger used.
Charging a BL-4CT battery with the AC-3 charger takes
approximately 2 hours 30 minutes while the phone is
in the standby mode.
11