Filter
Top Products
● WPA/WPA2 — Select the means of authentication: EAP to use an extensible
authentication protocol (EAP) plug-in, or Pre-shared key to use a password.
Complete the appropriate settings:
● EAP plug-in settings — Enter the settings according to the instructions from
your service provider.
● Pre-shared key — Enter a password. The same password must be entered
on the WLAN access point device.
● WPA2 only mode — Only WPA2 enabled devices are allowed to establish a
connection in this mode.
Advanced WLAN settings
Select Options > Advanced settings and from the following:
● IPv4 settings — Enter the IP address of your device, the subnet IP address, the
default gateway, and the IP addresses of the primary and secondary DNS servers.
Contact your internet service provider for these addresses.
● IPv6 settings — Define the type of DNS address.
● Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11)
manually, select User defined.
● Proxy server address — Enter the address for the proxy server.
● Proxy port number — Enter the proxy port number.
Active data connections
Select Menu > Settings and Connectivity > Connection mgr..
In the active data connections view, you can see the open data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Connectivity
© 2009 Nokia. All rights reserved.104