Filter
Top Products
Security settings
Phone and SIM
Select Menu > Settings and Phone > Phone mgmt. > Security > Phone and
SIM card.
Select from the following:
● PIN code request — When active, the code is requested each time the device
is switched on. Deactivating the PIN code request may not be allowed by some
SIM cards.
● PIN code andPIN2 code — Change the PIN and PIN2 code. These codes can only
include numbers. Avoid using access codes similar to the emergency numbers to
prevent accidental dialling of the emergency number. If you forget the PIN or
PIN2 code, contact your service provider. If you forget the lock code, contact a
Nokia Care point or your service provider.
● Lock code — The lock code is used to unlock the device. To avoid unauthorised
use of your device, change the lock code. The preset code is 12345. The new code
can be 4-255 characters long. Alphanumeric characters and both uppercase and
lowercase characters can be used. The device notifies you if the lock code is not
properly formatted. Keep the new code secret and separate from your device.
● Phone autolock period — To avoid unauthorised use, you can set a time-out
after which the device automatically locks. A locked device cannot be used until
the correct lock code is entered. To turn off autolock, select None.
● Lock if SIM card changed — Set the device to ask for the lock code when an
unknown SIM card is inserted into your device. The device maintains a list of SIM
cards that are recognised as the owner’s cards.
● Remote phone locking — Enable or disable remote lock.
● Closed user group — Specify a group of people to whom you can call and who
can call you (network service).
● Confirm SIM services — Set the device to display confirmation messages when
you are using a SIM card service (network service).
Settings
© 2009 Nokia. All rights reserved. 127