Call functions
Copyright © 2009 Nokia. All rights reserved. 25
select > Settings > Settings > Phone > Call > Reject
call with message and Message text.
Call waiting
During a call, to answer the waiting call, press the call key.
The first call is put on hold. To switch between the two
calls, select Swap. To end the active call, press the end key.
To activate the call waiting function (network service),
select > Settings > Settings > Phone > Call > Call
waiting > Activate.
Video calls
Make a video call
To make a video call, you may need to have a USIM card
and be within the coverage of a UMTS network. For
availability of and subscription to video call services,
contact your service provider. A video call can only be
made between two parties and when no other voice, video,
or data calls are active. The video call can be made to a
compatible mobile phone or an ISDN client.
You have captured a still image to be sent instead of
video sending.
You have denied video sending from your device.
1. Enter the phone number in the standby mode and
select Options
> Call > Video call. Or, select >
Contacts, scroll to the desired contact, and select
Options > Call
> Video call.
2. To change between showing video or only hearing
sound during a video call, select from the toolbar
Enable video sending or Disable video sending.
If you have denied video sending during a video call, the
call is still charged as a video call. Check the pricing
with your network operator or service provider.
3. To end the video call, press the end key.
Answer a video call
When a video call arrives, is displayed.
To answer the video call, press the call key. Allow video
image to be sent to caller? is shown. If you select Yes, the
image captured by the camera in your device is shown to
the caller. Otherwise, video sending is not activated.
If you have denied video sending during a video call, the
call is still charged as a video call. Check the pricing with
your service provider.
To end the video call, press the end key.
N5630_UG_2_en_hk.fm Page 25 Monday, March 2, 2009 12:26 PM