Filter
Top Products
Settings
Copyright © 2009 Nokia. All rights reserved. 67
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs
to the listed owner.
Factory settings — to reset some of the settings to their
original values. You need the lock code.
Positioning (network service) — to change positioning
settings.
Phone
See "Call settings", p. 26.
Connection
Select > Settings > Settings > Connection and from
the following:
Bluetooth — to switch Bluetooth technology on or off, and
edit Bluetooth settings. See "Bluetooth connection
settings", p. 74.
USB — to edit USB settings.
Destinations — to define the connection methods used for
reaching a particular destination
Packet data — to select the packet data connection
settings. The packet data settings affect all access points
using a packet data connection.
• To set the device to register to the packet data
network when you are in a network that supports
packet data, select Packet data connection >
When available. If you select When needed, the
device uses a packet data connection only if you
start an application or function that needs it.
• To set the access point name to use your device as a
modem with your computer, select Access point.
• To enable the use of HSDPA (network service) in
UMTS networks, select High speed packet access.
When HSDPA support is activated, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster.
Video sharing — to set your SIP profile settings manually.
See "Video sharing settings", p. 28.
SIP settings — to view and edit session initiation protocol
(SIP) profiles. See "Video sharing", p. 27.
Configurations — to view and delete configuration
contexts. Certain functions, such as web browsing and
multimedia messaging, may require configuration settings.
You may receive the settings from your service provider.
See "Configuration settings", p. 14.
APN control — to restrict the use of packet data access
points. This setting is only available if your SIM card
supports the service. To change the settings, you need the
PIN2 code.
N5630_UG_2_en_hk.fm Page 67 Monday, March 2, 2009 12:26 PM