Filter
Top Products
Messages (Menu 1)
Copyright © 2004 Nokia. All rights reserved. 37
• Dial the number using the
keypad.
• Press and hold 1.
• Press Listen if there is a
notification message in the
display.
• In the standby mode, select Menu
> Messages > Voice messages >
Listen to voice messages.
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.
Automate voice mail
You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dialling
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, press #.
Be precise; you will need this
information in “Setup voice mail
with dialling codes”, 38.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
+—International access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the Talk
key before sending the numbers or
codes that follow.