Filter
Top Products
Settings (Menu 4)
Copyright © 2004 Nokia. All rights reserved. 53
Automatic answer—Calls are
answered automatically after one
ring when a loopset is connected.
Select On or Off.
Charger
Scroll to the option of your choice,
and press Select to enter the
submenu and modify its settings.
Default profile—Choose the profile
you wish to be automatically
activated when your phone is
connected to the charger.
Lights—Choose to keep the phone
lights always on, or to shut off
automatically after several seconds.
Select On or Automatic.
■ Security settings
If your wireless service provider
supports these features, you may be
able to change certain security
settings in your phone such as PIN
code request, restricting calls,
security level, change PIN code or
security code, and voice privacy.
PIN code
The PIN code protects the UIM card
from unauthorized access. The PIN
code is 4 digits in length. After three
successive incorrect entries the PIN
code is blocked and you will be asked
to enter the personal unblocking key
(PUK) code. See “Personal
unblocking key (PUK) code”, 54 for
more information.
Note: The PIN code must be
obtained from your wireless
service provider. The PIN code
is typically provided with
your UIM card.
PIN code request
Enable your phone to request the
PIN code when powered on. This
provides extra security in case your
phone is lost or stolen.
1. At the standby mode, select
Menu > Settings > Security
settings > PIN code request.
2. Enter the PIN code, and press OK.
3. Select On, and press OK.
Change PIN code
Before you can change your PIN
code, you will need to enable PIN
code request. See “PIN code
request”, 53.
1. At the standby mode, select
Menu > Settings > Security
settings > Access codes > Change
PIN code.
2. Enter the current PIN code, and
press OK.
3. Enter the new PIN code, and
press OK.
4. Enter the new PIN code again,
and press OK.