Filter
Top Products
Settings
45
Select Menu > Settings > Connectivity > Data transfer > Server synchronization.
Depending on the settings, select Initializing synchronization or Initializing copy.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete, if the contacts or calendar are full.
USB data cable
You can use the USB data cable to transfer data between the phone and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable;
when the phone displays USB data cable connected. Select mode., select OK.
Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print images directly from the phone using a compatible printer
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Default mode, Printing, or Data storage.
■ Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You may
not be able to forward your calls if some call restricting functions are active.
See Call restrictions in "Security," p. 48.
Anykey answer > On — to answer an incoming call by briefly pressing any key except
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider,
select Set by network.
Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported
by your SIM card (network service).