Filter
Top Products
46
Note: It may not be necessary to have three NAMs for your
phone if your service provider has service or roaming agree-
ments for each area in which you wish to use your phone.
Contact your service provider for details.
Selecting the NAM for your phone
Press
Menu
4 4 6 (
Settings
-
Network services
-
NAM
selection
), highlight the phone number you want to use
and press
OK
.
Note: You need at least one active number to make calls.
You can not change from one NAM to another during a call.
Network feature setting
Call forwarding (
page 22
), Call waiting (
page 25
) and
Send own number (
page 61
) are network services
available through your service provider or dealer.
When you subscribe to any of these services, your
service provider or dealer gives you a separate feature
code to activate each service. Deactivation codes are
used to deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Each time you use a feature that requires a feature
code, that code is sent to the network to verify you’re
using the correct feature code.
Note: If your phone has more than one phone number pro-
grammed, any feature codes stored will apply only to your
primary phone number, or NAM 1.
See “NAM selection” on page 45 for details on NAM.
Storing codes
1.
Press
Menu
4 4 5 (
Settings
-
Network services
-
Network feature setting
)
2.
At
Feature Code:
, enter the feature code or deacti-
vation code received from your dealer (e.g.
∗
74,
∗
740, etc.), press
OK