Filter
Top Products
Settings
88
Network
Network mode — To select which network to use (shown only if
supported by the service provider). If you select Dual mode, the device
uses the GSM or UMTS network automatically, according to the network
parameters and the roaming agreements between the network
operators.
Operator selection — To set the phone to search for and select
automatically one of the available networks, select Automatic. To select
the desired network manually from a list of networks, select Manual. If
the connection to the manually selected network is lost, the phone
sounds an error tone and asks you to select a network again. The
selected network must have a roaming agreement with your home
network, that is, the operator whose SIM card is in your phone.
Cell info display (network service) — To set the phone to indicate when it
is used in a cellular network based on microcellular network (MCN)
technology and to activate cell info reception, select On.
Connection
Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB,
Access points, Packet data, Data call, SIP settings, Configurations, or
APN control.
Bluetooth
Switch Bluetooth on or off, and edit Bluetooth settings. See “Bluetooth
connection,” p. 96.
USB
Edit USB settings. See “USB data cable,” p. 99.
Access points
To establish a data connection, an access point is required. You can
define different kinds of access points:
• MMS access point to send and receive multimedia messages
• WAP access point to view web pages
• Internet access point (IAP) (for example, to send and receive e-mail)