Filter
Top Products
Connectivity
97
My phone's visibility > Shown to all — to allow your phone to be found
by other Bluetooth devices at all times. To allow your phone to be found
for a defined time period, select Define period. For security reasons it is
advisable to use the Hidden setting whenever possible.
My phone's name — to define a name for your phone.
Remote SIM mode > On — to enable the usage of the SIM card of the
phone by another device (for example, a car kit) by Bluetooth
technology (SIM access profile)
When the wireless device is in the remote SIM mode, you can only use a
compatible connected enhancement, such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make calls from your device,
you must first leave the remote SIM mode. If the device has been locked, enter
the lock code to unlock it first.
Send data
There can be only one active Bluetooth connection at a time.
1. Open an application where the item you wish to send is stored.
2. Scroll to the item you want to send, and select Options > Send > Via
Bluetooth.
3. The phone starts to search for devices within range. Paired devices
are shown with .
When searching for devices, some devices may show only the unique
device addresses. To find out the unique address of your phone, enter
the code *#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were
found previously is shown first. To start a new search, select More
devices. If you switch off the phone, the list of devices is cleared, and
the device search needs to be started again before sending data.
4. Select the device with which you want to connect.
5. Pairing
• If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter a passcode.