Filter
Top Products
WAP services
81
Copyright
© 2002 Nokia. All rights reserved.
• Login type - Select Manual or Automatic. If you select Automatic, the login
type uses the user name and password keyed in for the following settings. If
you select Manual, the login information must be entered when establishing a
connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Settings when GPRS is the selected data bearer
• GPRS connection - Select Always online or When needed.
If you select Always online, the phone automatically registers with a GPRS
network when you switch the phone on. Starting a WAP application creates
the connection between your phone and the network, making data transfers
possible. When you end the application, the GPRS connection ends but the
registration to the GPRS network remains.
If you select When needed, the GPRS connection is established when you
connect to a WAP service and is closed when you end the WAP connection.
• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network.
You can obtain the access point name from your network operator or service
provider.
• IP address - Key in the address, press for a dot and press OK. You can
obtain the IP address from your network operator or service provider.
• Authentication type - Select Secure or Normal.