Nokia 900 Cell Phone User Manual


 
Installation of any complex car accessories must be made by qualified personnel
only.
Battery
Type: Bp-6eW
Talk time:
Up to 7 hours (WCDMA) / 7 hours (GSM).
Standby:
Up to 300 hrs (WCDMA) / 300 hrs (GSM).
Important: Battery talk and stand-by times are estimates and only possible under
optimal network conditions. Actual battery talk and standby times depend on SIM
cards, features used, battery age and condition, temperatures to which battery is
exposed, network conditions, and many other factors, and may be significantly
shorter than those specified above. Ringing tones, hands free call handling, use in
digital mode, and other features will also consume the battery, and the amount of
time a device is used for calls will affect its stand-by time. Likewise, the amount of
time that the device is turned on and in the standby mode will affect its talk time.
Product and safety information
Network services and costs
Your device is approved for use on the WCDMA 850, 900, 1900, 2100 and GSM/EDGE 850, 900, 1800, 1900 MHz
networks. To use the device, you need a subscription with a service provider.
Using network services and downloading content to your device requires a network connection and may result in data traffic
costs. Some product features require support from the network, and you may need to subscribe to them.
Take care of your device
Handle your device, battery, charger and accessories with care. The following suggestions help you protect your warranty
coverage.
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode
electronic circuits. If your device gets wet, allow the device to dry.
Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.
Do not store the device in high temperatures. High temperatures can shorten the life of the device, damage the
battery, and warp or melt plastics.
Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form
inside the device and damage electronic circuits.
Do not attempt to open the device other than as instructed in the user guide.
Unauthorised modifications may damage the device and violate regulations governing radio devices.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics.
Only use a soft, clean, dry cloth to clean the surface of the device.
Do not paint the device. Paint can clog moving parts and prevent proper operation.
Product and safety information 81